A system in which air supply is matched to demand by the starting and stopping of the unit.
The torque at the bottom of a speed (rpm) versus torque curve. The torque developed by the motor is a percentage of the full-load or rated torque. At this torque the speed, the rotational speed of the motor as a percentage of synchronous speed is zero. Th ...
The force per unit area acting on the surface of a solid boundary parallel to the flow.
A vent used with pressure sensors to reduce the effect of wind on the pressure inlet. It is normally mounted remotely and connected to the sensor using airtight tubing.
The atmospheric pressure computed using station elevation as the reference datum level. Station pressure is usually the base value from which sea level pressure and altimeter setting are determined.
A unit of distance equal to 5280 feet. It is sometimes referred to as a land mile.
A triangular fore-and-aft sail carried on a stay. A sail that is set on a stay, and not on a yard or a mast. On a cutter this is the sail located between the jib and the main sail