A term generally applied to paints to describe holidays, holes, and skips in a film. Also used to describe shrinkage in castings and weld.
A unit of electrical force equal to that amount of electromotive force that will cause a steady current of one ampere to flow through a resistance of one ohm.
The amount of electromotive force, measured in volts, that exists between two points.
The ratio and percent of the actual delivered capacity (measured at inlet temperature, pressure and gas composition) to the piston displacement.
A thermometer used in aircraft which automatically corrects for adiabatic and frictional temperature rises by imparting a rotary motion to the air passing the thermal sensing element.
(Compressors/Gas Turbines) Is an alarm system that has maybe 3 sensors connected to it and it will require minimum of 2 of the 3 to alarm before the alarm will act. There is a controller connected that does the logic decision based on set parameters.
A contract whereby the shipowner places the vessel at the disposal of the charterer for one or more voyages, the shipowner being responsible for the operation of the vessel.
Voyages where the ship is not generally underway for periods long enough for seafarers to require sleep, or long off-duty periods, during the voyages.